CodeWarriorMalo@gmail.com
@CodeWarriorMalo

Simone (named to avoid copyright issues lol)
This is a game where the Raspberry Pi plays an increasingly complex pattern of lights and the user has to mimic the pattern by pressing the button associated with the correct light for each step of the pattern. Each successive pattern is increased by one randomly generated light. If the player fails to play back the pattern the Pi will rapidly flash the correct light that was missed.
Parts:
   4 LEDs (1 Red, 1 Blue, 1 Yellow, 1 Green)
   8 Resistors (220 Ohm)
   4 Buttons (Small)

Layout:
   POWER:
   Teal Wires connecting Negative (Ground) Channel to components and GPIO Pin #39
   Red Wires connecting Positive (3.3v) Channel to components and GPIO Pin #1
   LOGIC:
   Purple Wire connecting Red LED to GPIO Pin #22
   Purple Wire connecting Red Button to GPIO Pin #13
   Yellow Wire connecting Yellow LED to GPIO Pin #29
   Yellow Wire connecting Yellow Buton to GPIO Pin #15
   Green Wire connecting Green LED to GPIO Pin #18
   Green Wire connecting Green Button to GPIO Pin #11
   Blue Wire connecting Blue LED to GPIO Pin #31
   Blue Wire connecting Blue Button to GPIO Pin #16
   COMPLETE:

Code: